Service Project
Client List
Pre-shipment inspection of imported waste materials business rules
Pre-shipment inspection of imported waste materials business rules (November 2006 edition)
Pre-shipment inspection of imported waste materials business rules (November 2006 edition)
For the implementation of the "Republic of China Import and Export Commodity Inspection Law Ordinance," Article 22 "State of imported solid wastes as raw materials pre-shipment inspection system" as, according to the AQSIQ license, the State commission As a pre-shipment inspection of imported waste materials and pre-shipment inspection agency supervising the work management, in line with pre-shipment inspection of imported waste materials to ensure that work in line with the relevant provisions of the AQSIQ's principles and develop the business rules.
The rules apply to the AQSIQ inspection agency accredited foreign imports of waste materials to China in the extraterritorial application of pre-shipment inspection.
First, pre-shipment inspection of imported waste materials the basic requirements of business
1 pre-shipment inspection certificate issued by the import of waste materials must be tested by qualified inspectors;
(2) The pre-shipment inspection, pre-shipment inspection certificate issued by the waste materials subject to China's environmental control standards, do not allow a serious failure of (radioactive substances, explosives, there is medical waste, compressed gases are sealed, there is chemical waste, a large number of other non-garbage or recycling debris, a large number of entrainment is a national ban on the import of articles).
Second, the definition of specific terms of the rules
Pre-shipment inspection - in the import of waste raw materials to the mainland of China by the authorized inspection company prior to its inspection, monitoring equipment and facilities closed, and then to the Chinese entry-exit inspection and quarantine institutions and other relevant aspects of pre-shipment inspection certificate issued.
(1) of the container shipment, pre-shipment inspection should be supplied to the packing location; in the case of goods have been loaded into the container, if available test conditions (tests that can remove and replace the goods back, or to into the container to complete test), pre-shipment inspection can also be shipped to or before the arrival of shipments to appropriate locations.
(2) of the cabin, car or train transportation of bulk, pre-shipment or loading in the loading process before. Inspection before loading, loading should be to supervise the installation. Conditions should be sealed with Shi Shi Feng.
Pre-shipment inspection certificate - full name of "waste materials imported from China pre-shipment inspection certificate", issued by an authorized inspection company to the Chinese entry-exit inspection and quarantine authorities with a copy to the carrier of imported waste materials to prove that imports of waste materials before shipment abroad has been authorized inspection company inspected the goods in line with China's environmental control standards. According to "Commodity Inspection Law Enforcement Regulations", the consignee of imported waste materials to the port inspection and quarantine institutions should provide pre-shipment inspection certificate; in accordance with national authorities issued a "Provisional Regulations on Environmental Management of Waste Import ', import of solid waste carrier receiving carrier business, should be required to provide pre-shipment inspection agencies to issue delivery of pre-shipment inspection of imported waste certification. Therefore, the authorized inspection pre-shipment inspection certificate issued by the company's trade relations were submitted separately to the arrival port inspection and quarantine institutions and imported waste materials carrier.
Authorized inspection company - AQSIQ issued a "pre-shipment inspection of imported waste materials authorization certificate," the inspection company.
Recognized inspection company - AQSIQ issued a "pre-shipment inspection of imported waste materials organization certificate," the inspection company.
Supplier firms - issued by the State Administration of Quality Supervision, "overseas supplier enterprises of imported scrap materials certificate of registration" of the enterprise.
Approved self-test business - and signed by a recognized testing authority from the inspection agreement, the commission reviewed by the State and relevant information in the "pre-shipment inspection of imported waste materials electronic management system" (the electronic system) for the record, be able to approved self-test method for testing their own waste materials supply business.
Inspectors - including inspectors, auditors and certification signatory. Inspector is to live in goods inspection personnel; auditors to verify the identity of the inspector during inspection, test records and results of the audit staff; certificate on behalf of the signatory is authorized to pre-shipment inspection certificate issued to the person.
Supervise the installation - the inspection the inspector witnessed a specified means of delivery of goods to be loaded, or other monitoring tools to ensure that the inspection of cargo is loaded into the specified means of delivery.
Shi Feng - complete monitoring equipment, by the inspector in person with a particular tag seals applied to fasten the door of the specified means of delivery, or other monitoring tools to ensure that the seal is applied to fasten the door of the specified means of delivery , so that only the seal is damaged vehicles to open the door.
Supply to - of imported waste materials into the container packing to your country or region, or by way of bulk transport into the cabin, car or wagon shipped to the country or region.
Ship to - waste materials directly through the pre-shipment inspection (including intermodal) to China Mainland departure port or station.
Inspection lot - the same inspector continuous inspection at the same site of the inspection the same way (container, cabin, car or wagon) transport group of the same type of waste materials.
Inspection entity - managed by the authorized inspection of the specific implementation of the inspection, monitoring equipment and facilities closure of the institutions or bodies such as the authorization to carry out inspection and internal inspection of the same number of departments or groups, recognized self-inspection company, inspection company commissioned the inspection authority to accept recognized testing companies.
Third, the way pre-shipment inspection
1, authorized the company to send inspectors test test
Supplier firms to license companies to test applications for testing, inspection companies authorized to send inspectors to the loading place or place with the test conditions specified test, the issue of pre-shipment inspection certificate.
2, authorized inspection company approved qualified supplier firms self-test (approved self-test)
(1) authorized inspection company approved supplier firms eligible to become a recognized self-inspection company, inspection by accredited companies from mainland China to sell directly to the consignee of the waste materials for self-inspection, inspection authority approved by the Authority from the experience in the enterprise inspector to the loading place the issue on the basis of pre-shipment inspection certificate.
(2) supply companies can be recognized from inspection business conditions are: a large scale, have a more long-term supply business, a more stable source of goods, quality control is better, they can be employed to carry out the supply pre-shipment inspectors.
(3) a supplier firms can only be recognized by a licensed inspection company for the self-test supplier firms. Therefore, companies should supply the authorization to its major suppliers to apply for recognition from the inspection company experience.
(4) The authorized inspection company must be signed and approved inspection companies approved since the self-inspection agreement, defining the respective rights and responsibilities. Since the inspection company should be recognized in the agreement committed to a risk margin to ensure self-test of the first to meet the basic requirements of the rules and take responsibility for the inspection errors resulted in the risk of liability.
Approved self-test before signing an agreement, authorized inspection company should carefully examine the supplier firms to determine compliance with the rules of recognition from the experimental conditions, check our firms are not recognized by other authorized inspection company from inspection companies.
Authorized inspection company must be recognized from inspection of each business-related information submitted to the State commission for the record.
(5) approved self-test may not test other delivery companies to sell directly to enterprises in Mainland China consignee of waste materials.
(6) does not authorize the supplier to test the company or authorized inspection company can not send inspectors test case, the supplier to supplier firms have self-test conditions:
A. If the supplier is an authorized testing companies have approved the company's self-inspection companies can be supplied to the self-inspection, inspection and authorization by the respective company's self-test to monitor the situation, the issue of pre-shipment inspection certificate;
B. If the supplier firms is not recognized from inspection companies, waste materials can be recycled raw materials and China Inspection Inspection Association, contact the Secretariat by the Secretariat of the Association to recommend suitable recognition of their authorized inspection company to become a recognized self-test and monitor its business for the corresponding goods in self-test.
3, authorized inspection company approved laboratory testing company commissioned
Authorized inspection company accepted delivery companies test application, the company can be entrusted to an approved laboratory test, was commissioned by an approved laboratory, the company completed the inspection, the inspection records will be authorized to pay the appropriate inspection company, authorized by the pre-shipment inspection certificate issued by the company after the audit.
Was commissioned by an approved laboratory, the company must send their own inspectors complete the inspection, the inspection commission shall then check the company subcontracted to other tests.
Authorized inspection company commissioned tests, should supervise the commissioning party inspectors to the loading place serious test.
Fourth, the management of inspectors
1, the authorized inspection company must be engaged in on-site inspection of all inspectors (including approval from an approved laboratory, inspection companies and enterprises inspectors) report CNCA registration information, only the registered inspector to engage in on-site inspection.
(2) The authorized inspection company to test for all staff (inspectors, auditors and certificate signer) for pre-service training, the main training content includes: China's imports of raw materials, waste management laws and regulations, basic concepts, the mastery test elements, radiation detection means and methods, electronic systems and other elements of the business process.
3, the state commission inspectors time to time organize the necessary training.
4 recognized from its own inspector inspection business supply companies may not test for other waste materials to China.
Five overseas supplier enterprises to apply for pre-shipment inspection
1, pre-shipment inspection of the conditions apply:
A. supplier firms has been issued by AQSIQ "overseas supplier enterprises of imported scrap materials certificate of registration";
B. goods have been prepared, waiting shipment status;
C. to container transport of goods, has been booking or preparation booking; to transport bulk cargo cabin, and to determine the name of the vessel has been booking and cruises.
D. If the goods have been loaded into the container, should ensure that the goods have the test conditions (tests that can remove and replace the goods back, or the inspector to carry out a full examination into the container);
E. Implementation test before the deadline there is sufficient time for authorized inspection company to make inspection arrangements in advance.
2, the way to apply pre-shipment inspection
(1) electronic system via the Internet to submit applications. Each supplier companies are able to enter their user number of electronic systems, the ability to authorize testing companies test the reach of any supplier or shipped to a licensed inspection company to apply for pre-shipment inspection.
(2) the authorized inspection company to determine the format of the application form, by mail, fax, e-mail, to the authorized inspection companies to submit applications. This mode of application to be supplied by an authorized inspection company for a single enterprise application information into the electronic system, whether to accept this mode of application by an authorized inspection company to decide.
(3) To avoid unnecessary testing costs, should be supplied to the nearest authorized to apply for pre-shipment inspection companies. Not authorized test delivery to the company or authorized inspection company in the supply to the lack of human testing, the supply business should be taken to create conditions for self-testing method approved self-test to test, or test the goods transported to authorize the company to be inspected and have test conditions or the arrival of the shipment to shipment to the appropriate location test.
Sixth, the seals used to seal applied to regulate
Each inspection entity must have its own custom code and use of printed and non-repeating number of seals. Inspectors to complete inspection and pre-shipment inspection entity and supervise the installation, you must use their own seals on the container cargo facilities closed; on the cabin, car and other transportation of bulk cargo facilities with the conditions of closure seals have their own facilities closed.
Authorized inspection company should be subordinate entity of the seals of all test samples sent to the national commission for the record.
Seven, the electronic system to handle the business details of pre-shipment inspection procedures
1, delivery companies to submit test application
Supplier firms to enter their user number of electronic systems, electronic systems may be prompted to enter and submit inspection applications. Submit a grant application for a test, an application can not submit two (or more) of the inspection lot.
According to the input supply to the country or region, the electronic system will specify the authorized inspection company for the supply business test. If the delivery company in writing (mail, email or fax the application form) to the supplier or shipped to a licensed inspection company to apply, by an authorized inspection company the application information into the electronic system. Not authorized test delivery to the company's circumstances, the supply of goods should be transported to the company have authorized the shipment inspection companies to verify or apply for recognition from the experience.
2, authorized inspection company accepting applications for testing
Authorized inspection company in the electronic systems supply business to submit to view the test application, in line with Article IV of this rule apply for inspection to determine the conditions, should immediately accept the electronic system test applications. Because they do not meet the test conditions are not agreed to accept the application, and should refuse to test the application of electronic systems and the reasons. Information listed on the application due to unknown test can not determine whether to accept the application test, can not be accepted and the reasons, or contact with the supplier firms, supplier firms in the electronic system, please modify the test application.
3, inspection tasks assigned to the inspectors
Authorized inspection company accepting applications for inspection, shall immediately assume the electronic system when the time specified on the inspection inspectors will test the task assigned to the appropriate inspector.
4, the inspector to the site of the inspection test
(1) inspectors access to the electronic system on the test assigned to their task, the test should be applied immediately and contact supplier companies or to contact the test to determine the exact time and place, time and place to reach test to test.
(2) inspectors to the scene to examine in detail a digital camera to be brought to take the case of goods, but also inspection companies authorized to carry printed in line with the requirements of this rule attachment site inspection record sheets, detailed record of the goods and inspection of site conditions.
(3) For the shipment of waste materials in containers, the inspector should be packing the goods in accordance with relevant standards before the goods for the inspection. If the test when the goods have been loaded into the container, the container can enter a full inspection in the box test, or test should be unloaded. Found that the goods in question shall require the owner to pick out, to allow inspection of goods before packing, and the implementation of monitoring equipment. Monitoring facilities installed after the container seal.
Each inspector must take two containers of goods Zhuangwan digital photos, a half-open container in front of the inspector, the inspector can also see in front of cargo containers and container number (container for the upright after filling the waste materials, allowing the container is closed before the camera); another is applied to win the title of the seals, and can see the seal number. To facilitate these digital photos uploaded to the electronic system, photo size should be controlled, preferably not more than 100KB.
(4) of the cabin, car or train transportation of bulk waste materials, the inspector should be loaded before loading or during the inspection. If the inspection before loading, the loading must be to supervise the installation, inspection of cargo to be loaded to ensure that the specified means of delivery. Shi Feng of the conditions should have applied seal. Shot name, car number plates or wagon and the corresponding seal (if any) of the digital photos for upload to the electronic system. No seals on the cabin bulk cargo, the parties concerned should be obtained to determine the name of the vessel and voyage-related documents (copy or copies).
(5) fill in on-site inspection records. To fill in the on-site inspection and test record sheet, a complete inspection records only a single inspection lot of information.
A. description of the inspection and cargo, describing the information should enable a more intuitive understanding of the goods of others.
B. of metal waste materials (scrap steel, scrap metals, scrap metal, scrap smelting slag), recorded with a portable radiation detector test on-site measurements and detection of natural background values of the maximum value of the goods; goods by the channel-type radiation detection detected, the detector records the type and accurately detect location.
C. Identification of test results: All shipments meet inspection standards, to determine the goods pass; some goods do not meet the inspection standards to determine some of the goods pass; all the goods do not meet inspection standards, to determine the goods failed.
D. Record of qualified goods: The record for each container load cargo passing numbers and corresponding seal number; to the cabin bulk transport, and record the vessel name, voyage and cargo weight; a car or wagon Bulk Carrier, and record the license plate number and seal number (if any).
E. Inspection of goods found to have failed to record the approximate weight of substandard goods.
F. If the seized goods are bullet, cartridge cases and other scrap metal from military use, or cargo in the container upright into the filling, inspection records must be in the form of "other needs on the certificate shows the contents of the" field clearly Article 7 describes the rule requires proof of 10 words.
(6) written examination records, photographs and other original records on-site inspection must be properly preserved, on a timely filed to the authorized inspection company.
5, the inspection records entered into an electronic system
Inspectors complete the inspection, it should be site inspections into the electronic system to record a single in the relevant content and requirements of the test photos to electronic systems. If the inspector can not use the computer to upload their own inspection records, inspection records should be handed over to the work of the companies qualified people upload.
6, audit and inspection records
(1) review inspection records both the work of the inspector's supervision, but also to verify the authenticity of test records, test certificates to ensure that an important part of error-free. Authorized inspection company must have sufficient auditors audit the electronic system of inspection records have been uploaded.
(2) to verify the contents of the auditor:
A. inspectors to verify the identity and whether to test the site. Inspection record by clicking the page to view photos of each container, auditors should also see the inspector's booking photo and the photo before the container, make sure the people on the two photos is the same inspector.
B. Verification of inspection records the content is complete and accurate. Inspection records the columns in the page content should be complete; verification tests of a more complete description of contents, description of the information should enable a more intuitive understanding of the goods of others; confirm the exact site of the inspection described in detail, according to the information described in the implementation of others should be able to find test the exact location.
C. check the inspection records of the container number and seal numbers are consistent with the actual goods. By Click to view photos of each container, the container number to confirm the picture of the container with the record number is the same; by Click to view photos of each container seals, seals on the photo to confirm numbers and record numbers of seals is consistent, and seals the entity code and test code match.
D. of the cabin, car or train Bulk Carrier, and Click to view the photos in the test records to confirm the record of the name, car number plate or wagon number and corresponding seal number (if any) in information and photos are the same .
Bulk transport of the cabin, and must require the inspector to the scene examination to determine the name of the vessel and collected relevant documents came voyage check, confirm and record the vessel name and voyage related information in the same documents.
E. If the inspection record sheet in the description of the content is not clear, the goods can not be a more intuitive understanding of the situation, or other necessary, the auditor should contact the inspector to require inspectors to e-mail, fax, etc. photos provided include inspection, including The other supplementary information, confirmed the authenticity of suspicious inspection records.
F. inspection records found that the goods described as warheads, shells and other military scrap metal, container or cargo is upright filling, must verify the record "on the other need to explain the contents of the certificate" column whether the rules under Article Section 10 requires proof of a special language. If not, must be immediately entered in the record that particular language. If the military cargo of scrap metal, must promptly report to the higher executives verification inspectors are particularly careful examination.
G. inspection records meet the above requirements to be vetted and approved. Do not meet the requirements of the inspection records shall not be approved, and promptly report to the higher charge of staff.
7, issue and print pre-shipment inspection certificate
(1) the company's certificate of inspection authorized signatory in the electronic systems reviewed by the auditors on the audit of qualified inspection records, agreed to issue the certificate, press the switch to issue certificates in the system to generate electronic versions of pre-shipment inspection certificate.
(2) has been generated electronic pre-shipment inspection certificate by an authorized inspection company in the terminal printer to print system, a unified "China's imports of waste materials pre-shipment inspection certificate", to the pre-shipment inspection of the applicant and trade relations through people were submitted to the Chinese port of arrival and exit inspection and testing agency of the carrier of goods to China.
8, recognized self-test business processes
Recognized test from the testing company to submit an application and after acceptance by the authorized inspection company, inspection by accredited companies from their own electronic systems in their inspection tasks assigned inspector, the inspector according to the seventh paragraph 4 above the requirements for the inspection, the inspection records and the photographs will be uploaded into the system, after examination by an authorized inspection company pre-shipment inspection certificate issued.
9, commissioned testing business processes
Authorized inspection company accepting applications for inspection and delivery companies, in a single electronic system to be assigned to an approved laboratory testing company, was commissioned by the authorized inspection company in the electronic system for distribution to the appropriate inspector, inspector according to the aforementioned Article 7 4 requires the implementation of the examination, inspection records and the photographs will be uploaded into the system, after examination by an authorized inspection company issuing pre-shipment inspection certificate.
10, need the certificate on the matters specified
Chinese port inspection and quarantine for the prompt institution well in advance to prepare a special inspection of goods, from the military use of the bullet, bullet casings, artillery shells head, shells and other special scrap metal, must be expressed in the certificate, "the military cargo of scrap metal, has been carefully tested and found no explosives, "the proof of language; of goods under the filling of the container upright, must be expressed in the certificate" goods upright filling, carefully open the door to prevent injuries, "the description of language.
For the above description on the certificate must be proof of language, description language and the need to supplement other special items, authorized inspection company in the audit and inspection records, it should be recorded in the electronic system of inspection in the table, "other needs of the content described in the certificate." column entry corresponding content, the content of this field will automatically appear in the pre-shipment inspection certificate.
Eight, the electronic system when the accident emergency measures
1, following in the event of unforeseen circumstances, the authorized inspection company can temporarily switch to a unified electronic system from the network pre-shipment inspection under the emergency program to print a certificate for supply companies first shipment.
(1) the overall failure of pre-shipment inspection of electronic systems can not operate normally;
(2) regional cable Internet lines appear blocked;
2, the unexpected happens, emergency measures taken by the starting and ending time and the range of users from the commission information centers to identify and notify the appropriate port inspection and quarantine institutions.
3, inspection companies authorized to take emergency measures in case of accident should be preceded by a telephone report to the Information Center on duty agreed. After the information center to eliminate surprises on duty shall be notified by telephone the appropriate emergency measures authorized inspection company to stop.
4, the emergency measures in the pre-shipment inspection certificate issued under the authorization of blank check company's own certificate to print format and electronic format of the certificate issued by the same system, but the certificate number and date in the following format printing to the port inspection and quarantine agencies to identify treatment:
Certificate Number: Authorized Inspection Certificate Company Code-E + 5 digits printed numbers - test entity code (eg: NA-E34796-NAY);
Issuing Time: YYYY-MM-DD HH: MM (eg :2006 -10-26 14:45)
5, the lifting of the accident situation, the company should be authorized to test emergency measures to stop in time and in a timely manner under the emergency program in network data into electronic systems for timely delivery of the certificate information to the port inspection and quarantine institutions of electronic monitoring systems.
Authorized inspection company in the period with net non-accidental circumstances under emergency procedures can not import the certificate data in electronic systems.
Nine, the preservation of the original inspection records
To ensure that test results can be traced back, an effective solution to the parties concerned may challenge the certificate of inspection authorized inspection company should take measures to ensure that the original test records (on-site inspection record sheet, on-site inspection and photos, etc.) preserved at least one year.
Ten, the authorized inspection company must print their own on-site inspection record sheets issued to subordinate inspectors use the inspection entity. Records should contain a single attachment site inspection of the rules record the contents of the elements of a single template.
XI, supervision and management
1, the state commission to take online checks, inspection and quarantine agencies to collect feedback port, receive industry reports and site inspections, etc., outside the supervision of the relevant parties to comply with these rules, for violation of the rules to take warning, suspension or cancellation of electronic business processing system privileges (hereinafter referred to as online business) and other measures to deal with.
2, authorized inspection company, inspection entity, or inspector fails to comply with the rules of serious consequences, according to the following rules deal with:
(1) authorized inspection companies do not follow the rules of the inspection business failure caused by severe cases of imported waste, and ordered its investigation of the cause, be suspended during the investigation of its online business 3-7 days; serious cases causing serious consequences, reported to the State Administration of Quality Administration to suspend pre-shipment inspection qualification;
(2) approval from the inspection company, inspection companies are not recognized in accordance with the relevant provisions of the rules carefully tested, resulting in a serious failure of imported waste, and order it to rectify, to suspend its online business during the rectification. Since the inspection companies accredited by the State Administration of Quality Supervision stopped supplier firms eligible to suspend its business until the online registration for reinstatement of eligibility supplier firms; recognized inspection companies were de-registration from qualified businesses, cancel the electronic filing system for all information. Company was approved laboratory accreditation suspended or canceled, the corresponding online business or suspend the removal of the electronic system;
(3) The examiner is not conscientiously perform their duties of inspection of imported waste caused by severe failure conditions, suspend or cancel its qualification testing, electronic system in suspend or cancel its registration information. Cancellation of inspectors qualified personnel within six months can not be re-registered as inspectors.
3, authorized inspection company, inspection companies accredited and recognized testing since the company does not test the required procedures, audit and certification, according to the following rules deal with:
(1) authorize inspectors to check goods companies do not test on-site pre-shipment inspection certificate issued its warning; this behavior was found in a month more than 3 times, and ordered to rectify the suspension of online business 3 to 7 days;
(2) failure to Article 7 of this Rule 10 provides that should be specified in the certificate of the matter is not written certificate, authorized to stop every once in inspection company online business two days, causing serious consequences, according to Article 2 ( 1) treatment;
(3) approval from the inspector to the inspection companies do not have the goods on-site inspection, inspection records uploaded to the electronic system does not contain the required inspection photos, its a warning; this behavior was found in a month more than 3 times, ordered to rectify, to suspend its online business 10-20 days.
(4) The inspector did not accept the inspection mission to the site inspection of goods, failure to submit the necessary rules for the inspection photos or virtual manufacturing and inspection records (including test photos), and every time to suspend its inspectors found eligible for 20 days.
(5) inspector for failure to metal waste materials standards for radiation detection, each find a qualified inspector suspended for five days.
(6) Authorized inspectors from the inspection companies and other authorized to act as inspectors from the inspection company, and every time to suspend its inspectors found eligible for 30 days.
4, authorized inspection company or recognized self-inspection companies to avoid regulation virtual manufacturing inspector information, once discovered that the abolition of virtual manufacturing inspectors information on authorized inspection company warned that the adverse consequences of suspension of online business 3-7 days; suspended from the inspection of authorized business online business 20 days.
5, authorized inspection company was suspended during the online business, according to the actual need for the state department in charge of the commission can be recognized from the experience of its management of the company's business processes temporarily to other authorized inspection company, authorized by the other inspection companies in the online audit and inspection process pre-shipment inspection certificate issued.
6, the examiner is not required to participate in training organized by CNCA, or training, qualified in the assessment, suspend or cancel the inspector qualifications.
7, suspension or termination of authorized inspection company recognition from the experience of its management of the company's self-test when requested by authorized inspection company to suspend or cancel its online business in the electronic filing system information. Since the inspection by approved inspection companies do not have serious consequences for serious inspection company is authorized to terminate the self-test, or be suspended from the inspection and testing companies to voluntarily remove from the agreement, other authorized inspection within six months, the company shall not be recognized as a self-supply enterprises inspection companies.
12. This rule from January 1, 2007 implementation. The rules of supervision by the State Administration of Quality Supervision Inspection Division and the Office of the common interpretation of the national commission.
AQSIQ download the application form in English
AQSIQ download the application form in china
Solid wastes as raw materials imported foreign suppliers Implementing Rules for registration
oreign suppliers currently approved aqsiq registered a total of 2563 full list
The AQSIQ certificate method of identification guide
Details of the problem, pls Asked to Mr Zhao.
Note: Due to time differences，you need to consult，
You can send E-mail：aqsiqccc@gmail.com Or Msn: aqsiqccc@hotmail.com
All mail Consultation questions, can reply 12 hours.
Thank you!
Beijing TongRuiLian Technology Co., Ltd
Mr Zhao.
AQSIQ/AQSIQ License/AQSIQ Certificate/AQSIQ China/AQSIQ Waste/AQSIQ Apply/AQSIQ Registration/AQSIQ Certification
